Mega Black Friday Protection Bundle

« HOW TO USE THE INFINITY WAX FINISHING & PROTECTION BUNDLE »

Follow these steps to enhance paintwork gloss, protect exterior surfaces and complete your detail with a fresh, clean interior.

1. CLEAN & PREPARE YOUR VEHICLE

Before applying any of the products, thoroughly wash and rinse your vehicle using your preferred Infinity Wax pre-wash and contact wash products.

Remove all dirt, road grime and loose contamination from exterior surfaces.

Dry the vehicle using a clean microfibre drying towel, paying particular attention to paintwork, plastic trims, tyres and glass.

For the best results, ensure surfaces are clean and dry before applying protection.

2. ENHANCE PAINTWORK GLOSS

Apply Rapid Detailer to clean paintwork, working one panel at a time.

Lightly mist the product directly onto the surface or a clean microfibre cloth.

Spread evenly using gentle, straight-line motions to enhance gloss, slickness and water repellency.

Rapid Detailer requires no additional buffing, as any remaining light residue will naturally evaporate.

OPTIONAL: Rapid Detailer can also be used as a drying aid by lightly spraying onto wet paintwork before drying with a microfibre towel.

3. CLEAN & PROTECT YOUR GLASS

Apply Spotless+ Glass Cleaner directly to clean exterior or interior glass.

Working one window at a time, wipe the surface using a dedicated glass cloth or clean microfibre towel.

Use straight-line motions to remove fingerprints, dirt, grease and water spots.

Ensure no residue remains before moving to the next window.

The SiO₂-infused formula leaves behind a hydrophobic protective layer, helping water bead and run off exterior glass while providing up to 2 months of protection.

IMPORTANT: Spotless+ is not recommended for use on aftermarket window tint films.

4. RESTORE & PROTECT EXTERIOR PLASTICS

Ensure exterior plastic trims are thoroughly cleaned and completely dry before applying Plastic Coat.

Shake the bottle well, then apply a few sprays directly onto a microfibre applicator or suitable unpainted plastic surface.

Spread the product evenly across faded trims, bumpers, mirror housings and other compatible exterior plastics.

Wipe away any excess product using a clean microfibre cloth.

Allow approximately 10 minutes for the product to become touch dry.

Plastic Coat restores a rich, natural appearance while providing excellent water repellency and up to 6 months of protection.

IMPORTANT: Avoid overspray onto paintwork and follow the product's application instructions.

5. DRESS & PROTECT YOUR TYRES

Ensure your tyres are thoroughly cleaned and completely dry before applying Tyre Coat.

Spray a small amount directly onto the tyre sidewall or a dedicated foam applicator.

Spread evenly across the rubber using a sponge applicator or suitable short-bristled brush, ensuring complete coverage.

Allow approximately 10 minutes for the product to bond before driving the vehicle.

Tyre Coat leaves behind a clean, natural satin finish while helping repel water and dirt for up to 4 weeks.

IMPORTANT: Avoid applying to tyre treads, braking surfaces or other areas where additional slickness could create a hazard.

6. REFRESH INTERIOR SURFACES

Before applying Finale Interior Dressing, remove any loose dust and dirt from dashboards, door cards, centre consoles and interior plastics.

For heavily soiled areas, use a suitable interior cleaner before applying the dressing.

Spray a small amount of Finale directly onto a clean microfibre cloth or suitable interior surface.

Spread evenly across compatible interior plastics and trims, working in smaller sections.

Wipe away any excess using a fresh microfibre cloth to leave behind a natural, non-greasy matte finish.

Finale's anti-static formula helps reduce dust accumulation while leaving a refreshing citrus fragrance, with effects lasting up to 1 month.

IMPORTANT: Do not apply to pedals, floor mats, glass or surfaces where additional slickness could create a hazard.

7. COMPLETE THE FINISHING TOUCHES

Once all products have been applied, give the vehicle a final inspection.

Use Rapid Detailer to refresh any suitable painted areas that require additional gloss or to remove light fingerprints.

Check glass surfaces for any remaining smears and wipe clean with a dedicated glass cloth.

Ensure tyre and plastic dressings have settled and any excess product has been removed.

Your vehicle is now finished with enhanced paintwork gloss, water-repellent glass, refreshed exterior plastics, dressed tyres and a clean, naturally finished interior.